Is your HP Printer not printing anything or won't print a particular color? If that is so, then this troubleshooting guide will work fine for you.
In this post, we will find out the ways to get your HP Printer back to its normal position. Once it is back to normal, you can get fine and good quality prints, for which hp is known.
When your HP Printer stops giving expected outcome, you can do some troubleshooting before trying any other method. A basic troubleshooting can get your HP Printer working back again. This involves:
Often times, HP Printer won’t print black color or gives blank printouts in case it has not been calibrated. In case your HP Printer does not print black color, then you must calibrate it to get it working again. Apart from this, you may also try to align the printhead to fix the printing issues.
If your printer has stopped printing black ink colors, then the best thing you can try is replace the ink cartridges with genuine hp cartridges. This is highly recommended HP so that you do not face any printing issues in the future. If you do not use the genuine cartridges it may lead to several printing problems.
To check the ink level of the cartridges, you must
After checking the ink level in the cartridges, if you find out that the black cartridge is empty, then you should replace it immediately.
If these solutions do not make the printer to print black color, then you must clean the printhead gently and it will definitely work.
If HP Printer fails to connect with your printer or does not respond to its commands, then you must follow the steps mentioned below:
After performing these steps, one must reinstall the HP Printer driver by going to HP Support website.
Just in case, if your HP Printer fails to print even after changing the ink cartridge and replacing it with a new and genuine cartridge, then you should run an extended cleaning cycle. This helps in rectifying the problem with your printer. Besides this, it also helps the printer to recognize the cartridges. Else, get help from HP Support .
There might be some settings enabled in the ‘Printer Preferences’ which are not letting your printer to print the full page. Go to the ‘Printing Preferences’ section and change the necessary settings in the ‘Paper or Paper/Quality’ section.
You need to do certain checks to get to know the reason behind it. First, you should check for any error messages, try to clear the print queue, check for connection problems, install latest printer drivers, and check paper jamming issues.
If your computer, via which you are giving print command, is running on an outdated version of the HP Printer drivers, then it will not respond to your commands. Simply, install the latest printer drivers and see if it helps.
If you see any error or face issues with the HP Printer ink cartridges, then you must do as suggested according to the error message. Otherwise, check the electrical connections. Use HP Print and Scan Doctor to rectify the issue or reinstall the ink cartridges.
If you have ensured that the printer is connected properly from all the channels and still not printing, then there is a problem with the paper. Either there are no papers in the cartridges. Besides this, you might have set it to offline mode.
This situation occurs when you have not selected the right printer drivers. You must print a report page to know the actual reason behind the same. Also, check the settings and resolve the issue accordingly.
The use of HP brand name, images, videos, logos, links, or hyperlinks used on this website are only for reference/education as we have no link with HP. These belong to their respective proprietors and we completely disclaim their authority. We shall not be held liable for any situational or financial losses through our website, under any circumstances.
HP PRINTER